Foot Protection

Overview
What features make safety shoes different from regular “street” shoes? Basically, they are designed to protect the foot and toes in areas most likely to be injured. There are many different types and designs of protective footwear.

Types of protective footwear.
A few of the different types of protective footwear include:
• safety shoes — have toe guards that meet requirements of American National Standards Institute (ANSI) Z41-1991, Protective Footwear. Steel, reinforced plastic, and hard rubber are used to protect toes, depending upon their intended us.
• metatarsal guards — instep guards to protect the top of the foot from impacts. Metal guards extend over the top of the shoe, rather than just over the toes.
• conductive shoes — prevent the accumulation of static electricity that builds up in the body of the wearer.
• electrical hazard shoes — offer protection against shock hazards from contact with exposed circuits.
• puncture resistant shoes — protect against the hazards of stepping on sharp objects that can penetrate the soles.
• slip resistant shoes — have soles which provide improved traction in situations where slipping hazards exist.

When choosing safety footwear, look for shoes that meet ANSI Z41-1991 Protective Footwear.

What must my employer do?
Your employer must train you on the need for and use of protective footwear. Training should include:
• information on when PPE is needed.
• an explanation on what protective footwear is required, and where to obtain it.
• how to put on, take off, adjust, and wear protective footwear.
• the limitations of the PPE.
• the proper care, maintenance, useful life, and disposal of the PPE.

What must I do?
For your safety, it is crucial that you understand and follow your company’s procedures for foot protection. If you have any questions regarding how to protect your feet from injury on the job, ask your supervisor.

This information is provided by: Assurance Agency http://www.assuranceagency.com

Compressed Gases

Overview
Compressed gases are extremely useful in our lives. At the same time, if not handled, stored and used properly, compressed gases can be hazardous.
Compressed gases can be hazardous because they may be:

• Stored under high pressure: When a high-pressure cylinder accidentally ruptures or when a valve assembly breaks off, rocketing can occur. A compressed gas cylinder has enough stored energy to blast through a concrete wall.

• Flammable: Flammable gases catch fire easily and burn quickly. Adding flammability to a compression hazard can create an extremely dangerous situation.

• Asphyxiant (inert): Inert gases can displace oxygen needed for breathing, leading to suffocation of exposed employees.

• Oxidizing: Oxidizing gases can explode violently when they come into contact with organic and combustible materials. Containers of oxidizing gases must be kept free of oils, greases, and other hydrocarbon-based materials.

• Corrosive: Corrosive gases attack exposed tissues and other materials. Special PPE and a self-contained breathing apparatus is required when handling these gases. Know the location of eyewashes and emergency showers.

• Toxic: Poisonous gases which should only be handled by specially trained workers. Appropriate PPE is always required when handling toxic gases.

• Cryogenic: Extremely cold gases or liquids which can cause frostbite or burned skin if they come into contact with exposed skin. These gases can also displace oxygen causing an asphyxiation hazard.

What must my employer do?
Your employer will:
• review the appropriate procedures for handling pressurized gases, and work practices in your workplace.
• demonstrate the appropriate use of PPE for the gases used in your workplace.
• show and explain the meanings of any hazardous warning signs used at the workplace.

This information is provided by: Assurance Agency http://www.assuranceagency.com

Flammable Liquids

There are many thousands of chemicals in use in the American workplace. One of the most common hazards of these chemicals is flammability. To protect you and your co-workers, OSHA has developed some very detailed regulations covering the storage and use of flammable liquids.

Not all employees require special training in handling of flammable liquids, but any employee involved in the storage, transfer, use, or disposal of flammable liquids does require special training.

Improper handling of flammables brings a great risk of fire. When a flammable liquid is spilled, vapors begin to form immediately. It is the vapors that will ignite, and which pose the greater danger.

Flammable liquid spill cleanup should begin promptly. Vapors will continue to build until the liquid is removed, and they can be ignited by a variety of sources in the average workplace.

Categories of flammable liquids
There are four categories of flammable liquids:
· Category 1 – having flash points below 73.4ºF and having boiling points at or below 95ºF.
· Category 2 – having flash points below 73.4ºF and having boiling points above 95ºF.
· Category 3 – having flash points at or above 73.4ºF and at or below 140ºF. When a Category 3 liquid with a flash point at or above 100ºF is heated for use to within 30ºF of its flashpoint, it shall be handled in accordance with the requirements for a Category 3 liquid with a flashpoint below 100ºF
· Category 4 – having flash points at or above 140ºF and at or below 199.4ºF. When a Category 4 flammable liquid is heated for use to within 30ºF of its flashpoint, it shall be handled in accordance with the requirements for a Category 3 liquid with a flashpoint at or above 100ºF.

When a liquid with a flashpoint greater than 199.4ºF is heated for use to within 30ºF of its flashpoint, it shall be handled in accordance with the requirements for a Category 4 flammable liquid.

Safety data sheets
An easy way to identify flammable or combustible liquids is through the safety data sheet (SDS). The SDS will have information on fire and explosive hazards, and will list any special handling and storage precautions.

This information is provided by: Assurance Agency  http://www.assuranceagency.com

Heat Related Illnesses and Injuries TBT

When your body is unable to cool itself through sweating, serious heat illnesses may occur. The most severe heat-induced illnesses are heat exhaustion and heat stroke. If actions are not taken to treat heat exhaustion, the illness could progress to heat stroke and you could possibly die.

Heat exhaustion
- headaches
- dizziness/lightheadedness
- weakness
- mood changes (irritable, or confused or can’t think straight)
- feeling sick to your stomach
- vomiting/throwing up
- decreased and dark colored urine
- fainting/passing out; pale clammy skin

Heat stroke—A medical emergency
- Dry pale skin (no sweating)
- hot red skin (looks like a sunburn)
- mood changes (irritable, confused or not making any sense)
- seizures/fits
- collapse/passed out (will not respond)

Things you can do to prevent difficulties from heat related illnesses and injuries:
- Learn the signs and symptoms of heat-induced illnesses and what you can do to help yourself or a fellow employee.
- Use the buddy system (work in pairs) when working in hot conditions.
- Drink plenty of cool water (one small cup every 15-20 minutes).
- Wear light, loose-fitting, breathable (like cotton) clothing.
- Avoid eating large meals before working in hot environments.
- Avoid caffeine and alcoholic beverages (these beverages make your body lose water and increase the risk for heat illnesses).
- Slowly build up tolerance to the heat and your work activity (usually takes about two weeks).
- Do your heaviest work in the coolest part of the day.
- Take frequent short breaks in cool shaded areas. This allows your body to cool down.

You are at increased risk when you:
- Take certain medications. Check with your doctor, nurse, or pharmacy and ask if any medicines you are taking affect you while working in hot environments.
- Have had a heat-induced illness in the past.
- Wear some personal protective equipment such as respirators or protective suits.

This information is provided by: Assurance Agency  http://www.assuranceagency.com