Friday, August 2, 2013
Kane County Cougars vs Wisconin Timber Rattlers
The event starts at 5:30 pm, Game starts at 6:30 pm.
The event will be held in the Super Suite.
*Post game fireworks show
*Run the bases after the game
*Unlimited food, soft drinks, water and cocktails included.
Join us as we partner with the Fox Valley AGC and the Finishing
Contractors Association of Illinois.
General Contractors and Residential Builders will be in attendance.
Adults (11 and up) - $55
Children (3-10) - $30
Register and pay online for this event.
Download the USPS / Fax Registration Form.
###
Wednesday, July 24, 2013
Monday, July 22, 2013
Protecting Your Eyes - On the Job Tool Box Safety Talks
Have you ever imagined what it would be like if you were blind?
Close your eyes for 10seconds...now realize that if you were blind, that is what you would see the rest of your life.Eye injuries occur all too often because employees do not have on the proper eye protection. In the pastyear, we know of at least 6 instances where wearing safety glasses saved an employee’s eyesight.Don’t take for granted your eyesight. Eyes are not replaceable.
Follow these safety requirements for safety glasses:
• Approved Safety Glasses must be worn when there is a potential eye hazard on most construction sites, that’s almost 100% of the time.
• Generally, if you are using any power tool, nailing, grinding, or using a chemical that can harm your eyes, you should be wearing safety glasses.
• Approved Safety glasses are stamped Z87.1
• If glasses are not stamped Z87.1, they are not safety glasses and do not provide the necessary protection. Regular sunglasses provide only a false sense of protection.
• Employees who have prescription lenses need to have side shields and the lenses and frames need to be impact resistant. There are prescription safety glasses available at most places where you purchase your glasses. Check with your optical provider.
• If employees with prescription lenses do not have side shields or appropriate prescription safety glasses, then approved safety goggles or over safety glasses must be worn over the prescription lenses.
•Tinted lenses can be worn outdoors.
• Clear or amber lenses should be worn indoors or outdoors when it is cloudy.
###
Wednesday, July 17, 2013
Effects of Hot Weather
Temperature
Construction
workers generally work outside and are exposed to heat and the sun. Too
much heat or cold, especially if combined with high humidity or high
winds, can harm your health and interfere with work. Hot, humid
conditions can cause heat exhaustion, cramps, and even fainting.
Employers have a responsibility to protect workers from extreme
temperatures.
Heat
At times, workers
may be required to work in hot environments for long periods. When the
human body's unable to maintain a normal temperature, heat-related
illnesses can occur and may result in death.
###
Monday, July 8, 2013
RCEC-learn more about the Risk Management Association
Risk Management Association - RMA
Prospective Member Breakfast
Thursday, August 1, 2013
Maggiano's Little Italy
1901 E. Woodfield Road
Schaumburg, IL 60173
7:30 am to 8:15 am: Registration and
Breakfast
8:15 am to 10:00 am: Program
8:15 am to 10:00 am: Program
Join us to learn more about an exclusive
workers' compensation program for the "Industry's
Best Contractors".
There is no cost for this event, yes, it is
free.
###
Sunday, July 7, 2013
Scaffolding
You should know that over one-third of the serious injuries to workers in the building trades are caused by falls from one level to another. These accidents usually occur because someone is working or standing on an unsafe surface (a makeshift scaffold) or using a scaffold incorrectly or working on one that hasn’t been put up properly. They may seem safe but they can be very dangerous. Makeshift scaffolds should not be used and are made of such things as:
• concrete blocks
• boxes
• buckets
• piles of scrap material
• poorly supported wooden planks
• machinery
Take the time to build a safe scaffold. We are not in such a hurry that we are willing to sacrifice safety. There are a couple kinds of scaffolds that are acceptable if built right. Some examples of scaffolds and things to remember when erecting them are:
Rolling Scaffold
• They should only be used on a level surface.
• The height should not exceed 4 times the minimum base dimension, unless guyed or equipped with outriggers.
• Decking should be full width and secured against displacement.
• They should have guardrails, midrails and toe boards.
• All casters should be locked except when the scaffold is being moved.
• No one should be on it while it is being moved.
Tubular Metal Scaffold
• Should be tied to and braced against the structure at intervals not to exceed 30 feet horizontally and 26 feet vertically.
• They should have guardrails, midrails and toe boards.
• Screwjacks should be adjusted to plumb and level the scaffold.
• All crossbracing should be installed.
• Mudsills should be used on soft ground.
• Planks should be lapped not less than 12” nor more than 18”.
• Ice or snow should be cleaned off before it is used.
• Safe means of access should be provided – Climbing crossbracing is prohibited.
[MORE]
###
• concrete blocks
• boxes
• buckets
• piles of scrap material
• poorly supported wooden planks
• machinery
Take the time to build a safe scaffold. We are not in such a hurry that we are willing to sacrifice safety. There are a couple kinds of scaffolds that are acceptable if built right. Some examples of scaffolds and things to remember when erecting them are:
Rolling Scaffold
• They should only be used on a level surface.
• The height should not exceed 4 times the minimum base dimension, unless guyed or equipped with outriggers.
• Decking should be full width and secured against displacement.
• They should have guardrails, midrails and toe boards.
• All casters should be locked except when the scaffold is being moved.
• No one should be on it while it is being moved.
Tubular Metal Scaffold
• Should be tied to and braced against the structure at intervals not to exceed 30 feet horizontally and 26 feet vertically.
• They should have guardrails, midrails and toe boards.
• Screwjacks should be adjusted to plumb and level the scaffold.
• All crossbracing should be installed.
• Mudsills should be used on soft ground.
• Planks should be lapped not less than 12” nor more than 18”.
• Ice or snow should be cleaned off before it is used.
• Safe means of access should be provided – Climbing crossbracing is prohibited.
[MORE]
###
Monday, July 1, 2013
URGENT! Healthcare Reform Seminar Obama Care, is your company prepared?
Thursday, July 11, 2013
Wintrust Mortgage
9700 W. Higgins Road
Training Room B, 2nd floor
Rosemont, IL 60018
3 pm to 5 pm
Wintrust Mortgage
9700 W. Higgins Road
Training Room B, 2nd floor
Rosemont, IL 60018
3 pm to 5 pm
RCEC Member no charge
Non Members $45
Non Members $45
###
Thursday, June 27, 2013
OSHA urges increased safety awareness in fireworks industry in advance of July 4 celebrations.
WASHINGTON – The Occupational Safety and Health
Administration is urging the fireworks and pyrotechnics industry to be vigilant
in protecting workers from hazards while manufacturing, storing, transporting,
displaying and selling fireworks for public events.
“As we look forward to July 4 celebrations with fireworks
and festivities, we must also consider the safety of workers who handle
pyrotechnics,” said Assistant Secretary of Labor for Occupational Safety and
Health Dr. David Michaels. “Employers are responsible for keeping everyone safe
on the job and taking appropriate measures to protect workers from serious
injuries or death.”
In March 2012, three workers suffered serious burns caused
by an explosion at Global Pyrotechnic Solutions Inc. OSHA cited the Dittmer,
Mo., company nearly $117,000 for safety violations relating to explosive
hazards.
OSHA’s pyrotechnics directive, Compliance Policy for Manufacture, Storage, Sale, Handling, Use and
Display of Pyrotechnics, provides inspection guidance and OSHA requirements
as they apply to pyrotechnics facilities and operations. The directive is
available at http://www.osha.gov/OshDoc/Directive_pdf/CPL_02-01-053.pdf.
OSHA’s Web page on the pyrotechnics industry addresses retail
sales of fireworks and fireworks displays. Information on common hazards and
solutions found in both areas of the industry, and downloadable safety posters
for workplaces are available at http://www.osha.gov/SLTC/pyrotechnic/index.html.
It also includes a video, available at http://www.osha.gov/video/fireworks/index.html,
which demonstrates best industry practices for retail sales and manufacturers
based on National Fire Protection Association consensus standards.
Under the Occupational Safety and Health Act of 1970,
employers are responsible for providing safe and healthful workplaces for their
employees. OSHA’s role is to ensure these conditions for America’s working
men and women by setting and enforcing standards, and providing training, education
and assistance. For more information, visit www.osha.gov.
###
Subscribe to:
Posts (Atom)