The key element of OSHA’s construction safety program is that any
employee encountering hazardous conditions must be protected against the potential
hazards and must be trained in the use of personal protective equipment.
The requirements for
OSHA’s construction safety programs are found in:
·
1926.20, General safety and health provisions,
·
1926.21, Safety training and education,
·
1926.23, First aid and medical attention, and
·
1904.2, Log and summary of occupational injuries and
illnesses.
Why did OSHA develop requirements for a safety and health program?
Safety and health
programs have proven to be an effective, systematic method of identifying and
correcting existing workplace safety and health hazards, as well as preventing
those that might arise in the future.
The lack of adequate
safety and health programs, site inspections and training, are serious
violations of the OSHA standards. Further, OSHA developed the Focused
Inspection Initiative to recognize the efforts of responsible contractors who
have implemented effective safety and health programs and plans and to
encourage other contractors to adopt similar programs.
Requirements for a safety and health program
A safety and health
plan is required for each construction activity that applies to your jobsite.
For instance, if you do excavation work then a trenching and shoring safety
plan would be required (29 CFR 1926.650-.652). If you do construction work that
requires your employees to use respirators, then you need a respiratory
protection program (29 CFR 1926.103).
29 CFR 1926.20 details
the following requirements:
·
Accident prevention responsibilities—the employer must
initiate and maintain any safety programs that are necessary to comply with 29
CFR 1926.20 and .21.
·
Inspections—these safety programs must provide for
frequent and regular inspections of the jobsites, materials, and equipment to
be made by competent persons designated by the employers.
·
Defective or damaged equipment—the use of any
machinery, tool, material, or equipment that is not in compliance with any
applicable requirement of 29 CFR 1926 Part C is prohibited. This machine, tool,
material, or equipment must either be identified as unsafe by tagging or
locking the controls to render them inoperable or must be physically removed
from its place of operation.
·
Equipment and machinery operation—only those employees
qualified by training or experience to operate equipment and machinery.
What must be covered in a comprehensive safety and health program
Your employer needs to cover the following subjects:
·
Nature of hazards and how to recognize them,
·
What is being done to control these hazards,
·
Protective measures to prevent or minimize exposure
hazards, and
·
Applicable standard provisions.
What should you be trained in?
Your employer must instruct employees:
·
In the recognition and avoidance of unsafe conditions
and the regulations applicable to their work environment to control or
eliminate any hazards or other exposure to illness or injury.
·
Who are required to handle or use poisons, caustics,
and other harmful substances, in safe handling and use, and make sure they are
made aware of the potential hazards, personal hygiene, and personal protective
measures required.
·
On jobsite areas where they may be exposed to harmful
plants or animals, of the potential hazards, how to avoid injury, and the first
aid procedures to be used in the event of injury.
·
Who are required to handle or use flammable liquids,
gases, or toxic materials in the safe handling and use of these materials and
make them aware of the specific requirements contained in 29 CFR 1926 Subparts
D, F, and other applicable subparts of 29 CFR 1926.
·
Who are required to enter into confined or enclosed
spaces, as to the nature of the hazards involved, the necessary precautions to
be taken, and in the use of protective and emergency equipment required. Your
employer also must comply with any specific regulations that apply to work in
dangerous or potentially dangerous areas.
Confined or enclosed space means any space having a limited means of egress,
which is subject to the accumulation of toxic or flammable contaminants or has
an oxygen deficient atmosphere.
Confined or enclosed spaces include, but are not limited to, storage tanks,
process vessels, bins, boilers, ventilation, or exhaust ducts, sewers,
underground utility vaults, tunnels, pipelines, and open top spaces more than 4
feet in depth such as pits, tubs, vaults, and vessels.
This information is provided by Assurance Agency https:www.assuranceagency.com
