Head Protection

Download the full article

Download the RMA Sign In Sheet. DOC Format

Download the RMA Sign In Sheet. PDF Format


Overview
You may be exposed to the hazards of falling objects at work and need to protect yourself from the risk of head injuries. Construction workers, loggers, tree trimmers, shipbuilders, miners, and electrical utility workers all are required to wear protective headgear.

Types and classes of protective headgear
There are two types of headgear:
•   Type 1 — full brim at least 1.25 inches wide. 
•   Type 2 — no brim but may include a peak extending forward from the crown. 

There are three classes of headgear:
•   Class A — general service with limited voltage protection. 
•   Class B — utility service with high voltage protection. 
•   Class C — special service with no voltage protection. 
When choosing hard hats, look for ones that meet ANSI Z89.1-Safety
Requirements for Industrial Workers

What must my employer do?
Your employer must train you on the need for and use of head protection. Training should include:
•   Information on when PPE is needed. 
•   An explanation on what protective headgear is required, and where to obtain it. 
•   How to put on, take off, adjust, and wear protective headgear. 
•   The limitations of the PPE. 
•   The proper care, maintenance, useful life, and disposal of the PPE. 

What must I do?
Keep your hard hat in good condition.
Inspect your hard hat every day for:
•   Cracks, dents, and wear — discard hats that are damaged or chalky looking. 
•   The condition of the suspension system — look for torn straps, broken sewing lines, loose rivets, defective lugs, and other defects. 
•   Wash your hard hat monthly in warm, soapy water, and rinse thoroughly. 
•   Never paint your helmet or get solvents on it — this can weaken it.

This information provided by: Assurance Agency
###