Download the full article
Download the RMA Sign In Sheet. DOC Format
Download the RMA Sign In Sheet. PDF Format
In the event of a fire, the correct use of a portable fire extinguisher could mean the difference between suffering a minor loss or a major one. Portable fire extinguishers, if used properly, can make that difference. But there are several things to consider in using fire extinguishers. For instance, you must know the class of fire involved and the correct type of fire extinguisher to use.
CLASSES OF FIRES AND FIRE EXTINGUISHERS:
Class A Involves ordinary combustibles such as paper, wood, cloth, rubber or plastics. The common extinguishing media is water or dry chemical.
Class B Flammable liquids, grease or gases are covered under this category. Common extinguishing media are foam, carbon dioxide or dry chemical.
Class C Live electrical fires are class C fires. CO2 or dry chemical extinguishers should be used. However, the actual burning product may be class A items.
Class D Burning materials include combustible metals such as magnesium and sodium. Special extinguishing agents, approved by recognized testing laboratories, are needed when working with these metals.
RESPONDING TO FIRES:
NOTIFY those in danger & EVACUATE; CALL the local fire department; NOTIFY the foreman if a fire breaks out. Follow your company's procedures on responding to fires. But attempt to fight the fire only if, (1) you know the type of combustible material burning, (2) you have been trained to use the fire extinguisher correctly, and (3) if the fire is still in the incipient (beginning) stage. If the fire gets too large or out of control, evacuate immediately.
REMEMBER P-A-S-S WHEN USING AN EXTINGUISHER:
P - Pull. Pull the locking pin before using the fire extinguisher.
A - Aim. Aim the fire extinguisher at the base of the fire. Not at the flames or smoke.
S - Squeeze. Squeeze the lever of the fire extinguisher to operate and discharge.
S - Sweep. Sweep the fire extinguisher back and forth at the base of the fire to extinguish.
(Most extinguishers will only allow about 10-seconds of extinguishing media.)
Prevention is the key when it comes to firefighting. Good housekeeping, proper storage procedures and safe work practices will go a long way toward reducing the likelihood that a fire will destroy valuable property or injure either you or a fellow employee.
Discussion Questions:
• What could be some of the causes of fires at your jobsite?
• What kinds of flammables are most likely to create a fire danger at your jobsite?
• What type of fire extinguisher should be used on those flammables or combustibles?
This information provided by: Assurance Agency
No comments:
Post a Comment