Emergency Eye Washes and Safety Showers

 No one can predict when and where a chemical accident will occur. Therefore, you should be famliar with the location and operation of emergency eye wash facilities and safety showers. These can include eyewash fountains, drench showers, hand-held drench hoses and emergency bottles. Very simply, they all flush affected areas of your body with water.

Before a chemical accident . . .

• Identify chemical hazards: Identify all your work areas and tasks which create potential splash or eye hazards. Be familiar with the chemicals with which you work. Caution: Some chemicals are water-reactive and become toxic or corrosive when mixed with water.

• Know locations: Know the locations of all eye wash and shower facilities.

• Check distances: Your eyes can be damaged very quickly by many contaminants. The first fifteen seconds after the injury is the critical period. Because of this critical time period, the American National Standards Institute (ANSI), suggests that eye washes or showers be within 100 feet or a 10 second walk of the work area (ANSI Z358.1). Avoid placing machines and equipment in the pathway to an eye wash or safety shower.

• Check water delivery: Ask your employer how much water your eye wash stations deliver. Eye washes should supply 0.4 gallons per minute of water for at least 15 minutes. Safety showers should supply 20 gallons per minute for at least 15 minutes. Note: Many portable eye wash stations have a capacity of 5 to 10 gallons for a maximum usefulness of 5 minutes. Squeeze bottles and other plastic containers have even lower water capacities. These eye washes are meant to be supplementary to eye wash stations or showers that provide 15 minutes of flushing.

• Check emergency telephone number: Where 911 is not available, ensure the telephone number of medical help is posted on site telephones.

• Practice: Practice using the eye wash station to become familiar with how it works.

Inspection and maintenance
Eye washes and safety showers should be inspected according to manufacturer instructions. Squeeze bottles also require frequent testing, refilling, and maintenance since they lose water to evaporation, become contaminated, and are easily misplaced.If a chemical splashes into your eye . . .

If a chemical splashes into your eye . . .
1. Quickly flush your eyes with lots of water for at least 15 minutes (for best results, do so at an eye wash station or safety shower).
2. For serious burns (i.e., strong alkalies or acids), flushing should continue for 20 to 30 minutes which requires a considerable amount of water.
3. Try to force the eyes open to wash chemical out.
4. Do not bandage eyes.
5. Seek medical attention.

This information is provided by: Assurance Agency http://www.assuranceagency.com