Walking- Working Surfaces

 

This article is available in Spanish

Overview Slips, trips, and falls account for many industry accidents. Slips, trips, and falls are responsible for 10 percent of all accidental deaths. They are also the fourth leading cause, following motor vehicles, homicides, and being struck by objects or equipment, as a cause of fatalities. In an attempt to remove potential hazards from the workplace, OSHA developed 1910, Subpart D—Walking—Working Surfaces. Subpart D. Hazards involved with using walking-working surfaces The main hazard involved with walking and working surfaces include slips, trips, and falls. Stairways are also taken for granted, and so become a source for accidents in the workplace. What must my employer do? Your employer is responsible for providing a safe working environment. That includes reducing or eliminating hazards in walking and working areas by: ·         Keeping all employment, passageway, storerooms, and service rooms clean, orderly, and sanitary. ·         Maintain floors in a clean and, so far as possible, dry condition. If wet processes are used, drainage shall be maintained. Gratings, mats, or raised platforms must be provided. ·         Floors, working places, and passageways are to be kept free from protruding nails, splinters, or loose boards. ·         Keeping aisles and passageways clear and in good repair with no obstruction across or in aisles that could create hazards. ·         Appropriately marking permanent aisles and passageways. ·                   Maintaining proper aisle width so as to not limit passage or egress. ·                   Providing covers and/or guardrails to protect open pits, vats, tanks, ditches, and other hazards. ·                   Following load rating limits for all floors or roofs. ·                   Maintain adequate lighting in areas to illuminate walking surfaces. ·                   Providing handrails as required.