Face Protection

Overview
Face protection is required by OSHA where there is a reasonable probability of preventing injury when such equipment is used. Employers must provide a type of protection that is suitable for the work being done.

Employees must use the protection provided. A Bureau of Labor Statistics study found that about half of the injuries which occurred to workers faces resulted from not wearing the protective equipment supplied.

What must my employer do?
Your employer must ensure that:
• All workers required to wear face protection understand how to use it so that it offers the most protection.
• These workers must demonstrate understanding of the training, and the ability to use it properly before being allowed to perform work requiring its use.

What must I do?
As an employee who is required to use face protection, you must:
• Understand how to use the required personal protection equipment (PPE).
• Know how to properly clean and maintain the PPE.

What must face protection do?
At a minimum, face protection must:
• Adequately protect against the particular hazards for which it was designed.
• Be reasonably comfortable when worn under the designated conditions.
• Fit snugly without interfering with the movements or vision of the wearer.
• Be durable.
• Be capable of being disinfected.
• Be easily cleanable.
• Be kept clean and in good repair.

This information is provided by: Assurance Agency

Flammables

Flammable liquids give off ignitable vapors. This, plus the fact that there are many ignition sources (such as a hand tool that sparks, or a cutting torch) at construction sites, is a real threat. Respect for, and proper use and care of flammable liquids is critical to a safe jobsite.
If you handle or use flammable liquids such as gasoline, some fuel oils and kerosene's, or naphtha, you must be instructed in the safe handling and use of these materials.

Fire prevention
Only approved containers and portable tanks can be used for storage and handling of flammable and combustible liquids.

Approved safety cans or Department of Transportation (DOT) approved containers must: (1) be used when handling or using flammable liquids in quantities of five gallons or less, (2) be red, (3) and if the flammable liquid has a flash point at or below 80 degrees F, have a yellow band or the name of the dangerous liquid stenciled in yellow.

While approved metal safety cans are still acceptable (5 gallons or less and equipped with a spring-closing lid and spout cover, a means to relieve internal pressure, and a flash arresting screen), OSHA will recognize that various nationally recognized testing labs have also approved the use of acceptable plastic safety cans for flammable liquids.

OSHA has determined that DOT approved containers of 5 gallon capacity, not equipped with a spring closing lid, spout cover, and flash-arresting screen are also acceptable because they sufficiently reduce the risk from fire, spills and explosions.
For quantities of one gallon or less, the original container may be used for storage, use and handling of flammable liquids.

Fire protection
A fire extinguisher, rated not less than 10B, must be provided within 50 feet of wherever more than five gallons of flammable or combustible liquids, or five pounds of flammable gas are being used on the jobsite. This does not apply to the fuel tanks of motor vehicles.

Jobsite safety
All solvent waste, oily rags, and flammable liquids must be kept in fire resistant covered containers until removed from the worksite.

Flammable or combustible liquids must not be stored in areas used for exits, stairways, or normally used for the safe passage of people.

Fire is a real threat at construction sites. Storage and use of flammable and combustible liquids increases the threat substantially, and also increases the possibility of a tragic accident involving burns to workers. Respect for, and proper use and care of dangerous liquids, is critical to a safe jobsite.

This information is provided by: Assurance Agency

Using Compressed Gases Safely

Overview
Compressed gases are hazardous because of the high pressure at which they are stored in cylinders and pressure tanks. The compressed gases can be flammable, poisonous, corrosive, or any combination of these.

How can they hurt me?
Mishandling of compressed gases has been responsible for fatalities, serious injuries, and property damage that has amounted to millions of dollars.

Flammable compressed gases:
• Explode if handled roughly or exposed to heat.
• Ignite by heat, sparks, or flames.
• Flash back if vapors travel to a source of ignition.
• Produce irritating or poisonous gas when burning.

Non-flammable compressed gases:
• Explode when in a mixture with fuels.

Health Effects of Compressed Gases Compressed gases:
• Are harmful if inhaled.
• Have extremely irritating vapors.
• Can cause cryogenic burns to skin and eyes.
• Produces irritating or poisonous gas when burning.
• Causes dizziness, unconsciousness, or suffocation.

Handling compressed gas cylinders
Compressed gas cylinders require careful handling to prevent damage. When handling cylinders:
• Move cylinders (securely fastened, in as near an upright position as possible) on special hand trucks.
• Don’t drop or bang cylinders together.
• Don’t roll, drag, or slide cylinders and never use cylinders as rollers or supports.
• Don’t lift cylinders by their caps.
• Don’t use magnets to lift cylinders.
• Cradles or platforms can be used to lift cylinders only if the cylinder was manufactured with lifting attachments.

Compressed Gas Storage
Some general guidelines in storing compressed gas cylinders include:
• Store cylinders in an upright position.
• Storing the cylinders in a safe, dry, well-ventilated place that is clean and free of combustible material.
• Avoiding areas where cylinders can be knocked down or damaged.
• Storing the cylinders in a position that ensures that the safety relief device is always in direct contact with the cylinder’s vapor space.
• Store oxygen CGCs at least 20 feet from flammables or combustibles, or separate them by a 5 foot, fire-resistant barrier.

This information is provided by Assurance Agency

Safe Response to Bloodborne Pathogens

Overview
If you are a health professional, a designated first responder, or first aid provider in your company, or if you are involved in maintenance or housekeeping work that could potentially expose you to bloodborne pathogens, you need to know how to protect yourself from potentially infectious material.

What are Bloodborne Pathogens?
Bloodborne pathogens are microorganisms in human blood that can cause disease in humans. Examples are hepatitis B virus (HBV), human immunodeficiency virus (HIV), malaria, syphilis, and brucellosis.

Bloodborne Pathogens and Needlesticks
OSHA has revised its Bloodborne Pathogens standard to clarify the need for employers to select safer needle devices as they become available and to involve employees in identifying and choosing the devices. Employers have to establish a log to track needlestick injuries.

Engineering and Work Practice Controls
Your company strives to reduce the risk of infection to employees who, in order to perform their jobs, may be reasonably anticipated to come into contact with blood and other potentially infectious materials. The risks can be reduced by following good work practices. Universal Precautions is an approach to infection control where all human blood and certain human body fluids are treated as if they were known to be infectious for bloodborne pathogens.

Follow these precautions when working with human blood and other potentially infectious materials (OPIMs):
• Wear appropriate personal protective equipment (PPE).
• Dispose of sharps properly.
• Properly label and enclose any material contaminated with blood or OPIMs in leakproof red bags or containers.
• Wash your hands after handling contaminated material (even though you were wearing PPE).
• Report any exposure incident to your employer. An exposure incident is any specific eye, mouth, other mucous membrane, non-intact skin, or parenteral contact with blood or OPIM resulting from the performance of an employee's duties.

Hepatitis B Vaccination
Hepatitis B is the greatest bloodborne pathogen risk. Your employer offers you the hepatitis B vaccination series when your job duties could expose you to blood or certain body fluids. If you initially refuse the vaccination, you must sign a declination form, but you can request to be vaccinated later.

This information is provided by: Assurance Agency