Monday, February 24, 2020

Hazard Communication

If you work with chemicals, you are one of 35 million workers exposed to one or more of the 650,000 chemicals in over 3.5 million companies across the country. The Occupational Safety and Health Administration (OSHA) recognized a growing need to protect workers like you in 1983 when it issued a rule called “Hazard Communication,” or just “HazCom.” You may have also heard the rule called “Rightto-Know.” That is because it is your right to know about the chemical hazards you work with and how you can protect yourself from injury and illness.

The rule will ensure you get trained on the following:
- Material Safety Data Sheets (MSDSs), the source for information on chemicals in your work area.
- The job site’s written program regarding hazard communication.
- Chemical labeling, the way to use labels to determine hazards of chemicals in use on the site.

Because chemicals can appear in many places on a job site, be aware of the following potentially hazardous chemicals that are commonly found and used on construction sites. Read their labels when you use them:

Chemicals commonly used in construction

Aluminum
Dynamite
Oxygen
Asphalt
Epoxy
Resin
Paint
Asbestos
Fiberglass
Pesticides
Battery fluids
Formaldehyde
Refrigerants
Benzene
Freon
Sealers
Bleach
Galvanized metal
Shellacs
Cadmium Gasoline & Diesel Fuel
Solders
Carbon dioxide
Glues
Solvents
Carbon monoxide
Grinding wheels Steel (when welded/cut)
Caulk
Iron
Sulfuric acid
Cement, Portland & PVC Pipe
Isopropyl alcohol
Turpentine
Chlorine
Janitorial supplies
Varnishes
Cleaning agents
Lead Wood dust
Detergents
LP Gas
Wood preservatives

This information is provided by: Assurance Agency  http://www.assuranceagency.com

Monday, February 17, 2020

Seven Common Causes of Incidents TBT

Consider this statistic: 80 out of every 100 incidents are the fault of the person involved in the incident. Unsafe Acts cause four times as many incidents & injuries as unsafe conditions.

Incidents occur for many reasons. In most industries people tend to look for "things" to blame when an incident happens, because it's easier than looking for "root causes," such as those listed below. Consider the underlying incident causes described. Have you been guilty of any of these attitudes or behaviors? If so, you may have not been injured-but next time you may not be so lucky.

• Taking Shortcuts: Every day we make decisions we hope will make the job faster and more efficient. But do time savers ever risk your own safety, or that of other crew members? Short cuts that reduce your safety on the job are not shortcuts, but an increased chance for injury.

• Being Over Confident: Confidence is a good thing. Overconfidence is too much of a good thing. "It'll never happen to me" is an attitude that can lead to improper procedures, tools, or methods in your work. Any of these can lead to an injury.

• Starting a Task with Incomplete Instructions: To do the job safely and right the first time you need complete information. Have you ever seen a worker sent to do a job, having been given only a part of the job's instructions? Don't be shy about asking for explanations about work procedures and safety precautions. It isn't dumb to ask questions; it's dumb not to.

• Poor Housekeeping: When clients, managers or safety professionals walk through your work site, housekeeping is an accurate indicator of everyone's attitude about quality, production and safety. Poor housekeeping creates hazards of all types. A well maintained area sets a standard for others to follow. Good housekeeping involves both pride and safety.

• Ignoring Safety Procedures: Purposely failing to observe safety procedures can endanger you and your co-workers. You are being paid to follow the company safety policies-not to make your own rules. Being "casual" about safety can lead to a casualty!

• Mental Distractions from Work: Having a bad day at home and worrying about it at work is a hazardous combination. Dropping your 'mental' guard can pull your focus away from safe work procedures. You can also be distracted when you're busy working and a friend comes by to talk while you are trying to work. Don't become a statistic because you took your eyes off the machine "just for a minute."

• Failure to Pre-Plan the Work: There is a lot of talk today about Job Hazard Analysis. JHA's are an effective way to figure out the smartest ways to work safely and effectively. Being hasty in starting a task, or not thinking through the process can put you in harm’s way. Instead, Plan Your Work and then Work Your Plan!

"It is better to be careful 100 times than to get killed once." (Mark Twain)

This information is provided by: Assurance Agency http://www.assuranceagency.com

Monday, February 10, 2020

Behavior- Based Safety

Overview
There are many different views of behavior-based safety. Some consultants’ concepts are based on research; some are based on common sense. Some say behavior-based safety is all you need; others say it’s only part of the safety effort needed. Some say reinforcement is the answer; others say there are not enough opportunities for reinforcement in the workplace.
But, however your organization looks at it, behavior-based safety is the process of focusing on behavior to prevent/reduce occupational injuries.

Why should your company use behavior-based safety?
• Statistics reveal that 80% to 95% of incidents are caused by at-risk behavior.
• The frequency of injuries can be reduced.
• The entire workforce can participate in the process.
• Safety teams make safety improvements.
• Behavior-based safety requires progressive and proactive thinking.
• When added to a safety program already attempting to comply with regulations, behavior-based safety shows "good faith."

Key elements of behavior-based safety

• Employee/management involvement.
• Identification of safe and at-risk behavior.
• Observation.
• Feedback.
• Intervention (instructional, motivational, or supportive).

What must I do?
• As an employee who is concerned with safety, you can participate in the company safety program. Follow the work rules and processes that the company develops.
• Use all supplied personal protective equipment.
• Cooperate with the safety manager, superintendent or safety committee if they observe you at your workplace, or if they request information from you on how you work.

This information is provided by: Assurance Agency http://www.assuranceagency.com