The following information is being
provided to serve as a basic guideline in the use of ladders.
GENERAL
REQUIREMENTS
a. Ladders
shall be used for access to different levels.
b. Climbing
backing blocks or bracing shall be prohibited.
c.
Ladders
with broken or missing rungs or step, broken or split side rails, or other
defects shall be prohibited from use.
d.
The
area around the top and bottom of the ladder shall be kept clear.
e. Always
face the ladder when ascending or descending the ladder.
f.
At least one hand shall be used to grasp
the ladder when ascending or
descending a ladder.
g.
An object or load which could cause a
person to lose their balance and fall shall not be carried up or down a ladder.
h.
Never
use the top step or the top of a step ladder.
i.
Never
straddle the top of a step ladder.
LADDER
PLACEMENT
a.
Ladders
in use shall be tied off, blocked off or otherwise secured at the top to
prevent movement.
b.
Ladders
without slip resistant feet shall not be placed onto flat surfaces unless they
are cleated or otherwise secured.
c. Ladder
side rails shall extend at least 36 inches above the landing.
d.
Ladders shall be placed at such an angle
that the horizontal distance from the
top support to the foot of the ladder is
approximately one-quarter of the working
length of the ladder. (4
to 1 pitch)
e.
Ladders shall not be placed in any
location where it may become displaced by
work activities or
pedestrian traffic.
f.
Working from ladders: It is recommended that ladders be tied off
at the top while
working from them to
prevent displacement.
g.
Ladders placed on roof levels MUST have a
toe board at the base to
prevent
displacement.
This information is provided by: Assurance Agency
###
No comments:
Post a Comment