Muddy Conditions - On the job tool box talks

With the change from summer to fall usually means the change from dry ground to muddy conditions. Slip and fall accidents are much more likely to happen during these times. Unfortunately we are unable to control the weather, so we must adapt to conditions daily. Simple steps taken can be the difference in preventing an accident.

1. Keep boots free of mud. Employee should clean boots of mud once they reach the house or unit they are to work in. This may have to be done every time you leave and return. No employee should access top plates or roofs if their boots are muddy.

2. Keep ladders free of mud. If you are using a ladder in mud, tracking mud up the rungs of the ladders creates a very slippery and dangerous condition. Employees should use the bottom rung to scrap mud from there boots. If mud does accumulate, you may need to take a rag or towel and clean the rungs.

3. Walk in areas were stone driveways/paths have been provided. If a stone path is not provided, you may want to use some plywood or planks to create a walkway to the work area.

4. Store material/lumber close to the house to minimize having to walk in the mud to reach piles or stacks.

5. Move slowly – don’t be in a rush. Carrying material or equipment through mud could cause you to slip. Several strains and sprains have been cause as the result of a slip.

This information provided by: Assurance Agency 

###